3 Wires HK3 ACC Hardwire Kit Parking Mode Cable for A119V3 A129 A129IR
Adjustable voltage low voltage protection function, it will cut power to your dash camera when detecting the vehicle battery voltage is below the set number. It has four voltage options 11.8V, 12V, 12,2V, 12.4V
With ACC detection feature, the dash cam will switch to parking mode automatically if the vehicle engine off, and switch back to normal recording after vehicle engine on. Please be sure the cable is connected to the camera directly, not through the GPS mount.
Support three parking recording modes, auto event detection, time-lapse, and low bitrate recording
Also fit for A119/A119S/A119 PRO dash cam, but ACC function will not be available.
Length of Cable: 4 meters.
Note: Fuse Tap is not included default, please choose your required Fuse Type Options.
Three parking recording options:
Auto Event Detection: Automatically record when detecting moving objects or impact while the car is parking, it is like motion detection.
Time Lapse: Photography at specified intervals so that they can playback much faster than real time.
Low Bitrate Recording: Record video continuously at low bitrate to save storage space.
How it works:
ACC detection: Working with the VIOFO HK3 hardwire kit can realize ACC mode, which means a more sensitive detection for the start and stop of the car and the optimization of parking mode in a few seconds. Also, with the ACC detection feature, the dash camera supports the switch to parking mode automatically when the car engine off, and back to normal recording after the car engine on.
Car battery protection: It also applies low-voltage cutoff to prevent the dash camera from draining the vehicle’s battery.
Note: The HK3 will cut off power supply after 90 seconds to 2 minutes to prevent the car battery voltage fluctuates for a short time.