Latest activity

After a reset everything seems to be fine, i tried to trigger the conditions for the WiFi lockup several times but it didn't happened...

There is a screen saver setting in the menu. I would recommend leaving it set to turn off after a set time though. Leaving it on just...

I would adjust settings directly from the cameras settings. Also, be sure to manually default the cameras settings after the update. I...

Hi, My A129 Duo seems to be playing up recently. After i start the engine the camera starts recording and i can see it on the screen...

WiFi off requires physically pushing the record stop button on the camera and then long pressing the WiFi on/off button on the camera...

Thanks for your suggestion!

Sounds like your under powering the camera or your USB cable is bad/low quality. Are you using the supplied Viofo short USB data...

I powered off my computer but left the camera connected via USB. When I powered on the camera again it quit acting erratic. I was able...

Sounds like your under powering the camera or your USB cable is bad/low quality. Are you using the supplied Viofo short USB data...

I just completed updating the firmware to V1.9. When plugged in to the USB of my PC, the power comes on and after a few seconds it goes...

Next step I would take is to use the SDFormatter program to bring the card back to factory specs. Be sure to do a full overwrite...

I checked the card with H2testw and on Samsung site I don't find their tool to card testing.

Most of such recording issue required to check the SD card, the card manufacture have tools to detect this.

Every time I have some problem I do format to the card from camera menu. I don't have other card with similar performance. Slower cards...

At first time I formated the card in windows in exFAT. In last test I formatted it in camera.