VIOFO A119 Firmware

viofo

Administrator
Staff member
Joined
May 30, 2018
Messages
75
Likes
11
Points
8
#1
Latest A119 firmware is released , version number is V4.0, below is the download link, or check the attachment:

A119 V4.0 Firmware

Change log:

  1. SDK Updated to the latest
  2. WDR performance improved
  3. Support .TS video format



How to update:

Please do the following to upgrade the dash cam.

If you camera firmware version is V1.1 or earlier, please upgrade the loader LDBA119.bin first.
If you have already installed the V2.0 or newer firmware, no necessary to upgrade the loader, please ignore the #3--#6 steps.

From V1.4 firmware, the firmware will be automatically deleted from Micro SD card after upgrade completed.
  1. Use a memory card (recommend 16GB-128GB memory card) formatted by camera or on computer as FAT32
  2. Insert card in camera and connect it to computer using USB cable
  3. Copy just the LDBA119.bin on the root of the card
  4. After LDBA119.bin is copied to the card disconnect the camera from computer
  5. Reconnect the camera to your computer and wait few seconds until you can chose Mass Storage from camera menu
  6. Delete LDBA119.bin from the card using your PC and
  7. Copy the FWBA119.bin file on the root of the card
Reconnect the camera to your computer and wait more seconds until you can choose Mass Storage from camera menu, the front red LED will be blinking while upgrading.
Now you can disconnect the camera from PC and enjoy new A119 implementations.

For updating instruction, please take this video for your reference:
 
Last edited:

viofo

Administrator
Staff member
Joined
May 30, 2018
Messages
75
Likes
11
Points
8
#2
V3.91 is released:

  • 1.Updated: Beep will be totally off, if set Beep Off in system settings
 

viofo

Administrator
Staff member
Joined
May 30, 2018
Messages
75
Likes
11
Points
8
#3
V4.0 Released.

Change log:
  1. SDK Updated to the latest
  2. WDR performance improved
  3. Support .TS video format
 
Top