Git2 firmware update

Pajke

Well-Known Member
Joined
Feb 2, 2016
Messages
25
Points
78
Hi everyone, i have 2 questions if anyone can help. I have GitUp2 action camera with firmware 1.1_1130. I want to update it to latest 1.8. My first question is how can i know if i have sony or panasonic sensor, cause there are two different update files depends of these sensors? And second question, can i install directly the latest version of update or i have to go from oldest to newest?
 

Alistair Parsons

Well-Known Member
Joined
Dec 25, 2015
Messages
860
Points
93
In the version option in the settings, when it mentions what firmware you have, it should say P after the Git2 if its the panasonic version

iyou need to upgrade the loader as well
as perhttp://support.gitup.com/support/solutions/articles/6000157758-gitup-git2-sony-imx206-sensor-version-firmware
 

Pajke

Well-Known Member
Joined
Feb 2, 2016
Messages
25
Points
78
In the version option in the settings, when it mentions what firmware you have, it should say P after the Git2 if its the panasonic version

iyou need to upgrade the loader as well
as perhttp://support.gitup.com/support/solutions/articles/6000157758-gitup-git2-sony-imx206-sensor-version-firmware
Thank you very much.
 

Pajke

Well-Known Member
Joined
Feb 2, 2016
Messages
25
Points
78
Hello, i really need help. I have a problem with update my camera. I tried to update to GIT2LD.bin i followed the steps and i disconncted the camera from the PC.Then i reconncted it and the camera is not turning on.The green and red lights are always on and nothing happens. Can you help me please? The camera is death at the moment
 

Alistair Parsons

Well-Known Member
Joined
Dec 25, 2015
Messages
860
Points
93
Can you post precisely the steps you took......and what size sd card you were using
 

Pajke

Well-Known Member
Joined
Feb 2, 2016
Messages
25
Points
78
I had version 1.1_1130. SD card 32GB - FAT32 formatted. I used SD card reader to format through windows and then copy GIT2LD.bin to formatted SD card. Put the card in camera and power on. The camera just turn green and red light and nothing happened. Now the camera wont run anymore, when i take off SD card from camera it wont power on at all, and when i insert SD card with GIT2LD.bin on it, the green and red light is on - no blinking and nothing happens, it stays that way. I tried do put downgrade file - 1.1 version on SD card and also nothing happens when i turn it on.
 
Top