Bluetooth Remote Control

Cydeen

New Member
Joined
Aug 19, 2019
Messages
14
Points
3
Hi,

Just paired a bluetooth remote control to VIOFO 129 Duo. When press a remote control button, the camera did not response immediately. It takes about 10 second to response. Is it normal?

TQ
 

Capture Your Action

Active Member
Joined
Feb 24, 2019
Messages
406
Points
28
Pairing may take about 10 seconds, but it should not take 10 seconds to lock a photo after the initial pairing.
 

Cydeen

New Member
Joined
Aug 19, 2019
Messages
14
Points
3
Pairing may take about 10 seconds, but it should not take 10 seconds to lock a photo after the initial pairing.
But it does. By the time of photo taken, the actual moment that we want to capture passed already. By right it should capture on the spot.
 

Capture Your Action

Active Member
Joined
Feb 24, 2019
Messages
406
Points
28
Are you just giving it a quick press or are you pressing and holding the button. Pressing and holding it will just re-pair it to the camera. Just give a quick press.
 

Cydeen

New Member
Joined
Aug 19, 2019
Messages
14
Points
3
Quick press. Like snap on normal camera. For you info, I'm also using Ddpai x2 pro on my other car. Snapping photo taken immediately. No delay at all.
 

Capture Your Action

Active Member
Joined
Feb 24, 2019
Messages
406
Points
28
Try reloading the firmware. Then manually default the cameras setting from the menu. Then press the reset button on the side of the camera. Do this in this order.
 
Top